Below are links for the Orion connections on all the different variations of standard coils without drivers and intelligent coils with built-in drivers. Note on each drawing the software settings are displayed. Make sure to follow the start-up procedure to ensure all the settings are correct before attempting to start […]
Downloading a Map into a Device
To load a map into a device you first need to open one as described in the previous Load Map from PC section. Now you need to click on one of the 3 connect buttons Tuning Menus and Connect. Connect Button on Top Toolbar Connect button on left bottom information […]
4 Cylinder
Below are links for the Orion connections on all the different variations of standard coils without drivers and intelligent coils with built-in drivers. Note on each drawing the software settings are displayed. Make sure to follow the start-up procedure to ensure all the settings are correct before attempting to start […]
Load Map from PC
When you open a map from the hard drive the software will go offline. If settings in the device was not saved the software will ask you to save or cancel. Again there are 2 ways to load a map into the software. If you have opened the map recently […]
3 Cylinders
Below are links for the Orion connections on all the different variations of standard coils without drivers and intelligent coils with built-in drivers. Note on each drawing the software settings are displayed. Make sure to follow the start-up procedure to ensure all the settings are correct before attempting to start […]
2 Cylinders
Below are links for the Orion connections on all the different variations of standard coils without drivers and intelligent coils with built-in drivers. Note on each drawing the software settings are displayed. Make sure to follow the start-up procedure to ensure all the settings are correct before attempting to start […]
1 Cylinder
Below are links for the Orion connections on all the different variations of standard coils without drivers and intelligent coils with built-in drivers. Note on each drawing the software settings are displayed. Make sure to follow the start-up procedure to ensure all the settings are correct before attempting to start […]
Map Save to PC
First connect the device to the Hyperspace software so that it is live. To save a map from a device on your hard drive you can use the following methods. Go to file menu and click on Save As. Click on the Save Map file button on the top application […]
2 Rotor
Below are links for Orion on all the different variations of injector driver connections. Note on each drawing the software settings are displayed. Make sure to follow the start-up procedure to ensure all the settings are correct before attempting to start the engine. E33 High Impedance 4 Injector Full – […]
8 Cylinder
Below are links for Orion on all the different variations of injector driver connections. Note on each drawing the software settings are displayed. Make sure to follow the start-up procedure to ensure all the settings are correct before attempting to start the engine. E33 High Impedance 8 Injector Split – […]