Error Codes

The software has Error, Warning and Information codes displayed in the Status tool bar at the bottom. These codes will help the tuner to find problems during startup and tuning, also to see if the device is functioning correctly. Some of the functions on the device will indicate to the […]

Bluetooth Module

The Bluetooth/UART module is used for Android dash application from a third party dealer www.realdash.net It can also be used to connect to the Hyperspace tuning software. Bluetooth is not as fast and direct as the USB cable so there is a setting that has to be made in the […]

Help Menu

This menu holds information. About will indicate all the release fixes and changes between versions released. It also unlocks the embedded manual and will save a copy of it in the Hyperspace folder where the software was saved initially. Here all the keyboard keys for manipulating features and tuning values […]

Device

Assign Device For your convenience Assign Device is built into the Hyperspace Tuning Software. If a system is upgraded or activated on the Portal, the customer only need to have internet connection to activate his system. When you click Assig and there is an active allocation on the Portal, this […]

Wi-Fi Module

The Wi-Fi module is a third party module and is used for Apple dash application software from a third party dealer www.realdash.net It can also be used to connect to the Hyperspace tuning software but is not very user friendly. That option will not be supported by Spitronics due to […]

ECU Information

The device information screen displays vital information regarding the Spitronics ECU that has been connected. Note:  Firmware is the program that is loaded into the ECU to make the electronics operate in a specific way. This is normally a HEX file which is loaded into the product by a USB debug […]

Mercury Coil Driver

The MERCURY Coil Driver is a quality high performance spark generator designed for plain coils without built-in drivers. The Mercury ECU can drive coils with built in drivers directly but you have to use the external Mercury coil driver for basic coils. This driver comes in 2×2, 4×4 and 6×6 […]

Dual Drive by Wire Throttles

Due to the number of questions I decided to discuss this setup in detail. Dual throttles was designed to split mostly V engines to run it as two separate engines. The V12 and some V8 engines used this setup. The advantage is in cruise mode one throttle operate independently from […]

Spark Problems

Work through each point below to find your problem. First ensure that the setup in galaxy is done according to the startup procedure . You came to a point where you want to start and everything is according to the startup procedure but there is no spark or weak spark. […]