Pulses/RPM
This feature is used for Rev counter calibration. You can adjust the number of pulses per revolution for the RPM output. This is handy for engine conversions. A value of 1 to 60 pulses can be achieved with this function. On some firmware you may enter 61 which will then divert the crank angle signal onto the RPM output. This is also handy if the standard ECU is still live and doing other functions in the car. Note different electrical connections in the drawings to connect the different RPM gauges onto the Spitronics ECU.
This Auxiliary Values is used on certain firmware to achieve certain functions. It is only used in new development where the features were not yet developed in the Tuning Software. See the specific instructions for that engine type.
Leave A Comment?
You must be logged in to post a comment.