TCU Class Comparison

Orion Hardware STD INT ADV ULT Notes
Hardware          
TPS Sensor 1 1 1 1
RPM Sensor 1 1 1 1
Speed Sensor 1 1 1 1
Oil Temp Sensor 1 1
Low Range Sensor 1 1
Shifter Selection Switch 1 1 1 1
Tuning Maps Selection Switch 1 1 1 1
Tiptronic Up Switch 1 1 1 1
Tiptronic Down Switch 1 1 1 1
Hardware Outputs
Low Volt Negative Drivers 6 6 6 6
Low Volt Positive Drivers 4 4 4 4 Note 1
High Volt Negative Coil Drivers 6 6 6 6 Note 1
GP Outputs 2 2 2 * Note 2
Speedo Output 1 1 1
Electronic Relay Output
Relay Output 1 1 1 1
Battery Volts 1 1 1 1
Features          
Tiptronic Function 1 1 1 1
Overdrive Function 1 1
2nd Start Function 1 1
4 Tuning Maps 1 1 1 1
Individual Gear Shift Profiles 1 1 1 1
Duty Cycle Control 1 1 1 1
Speedo Calibration 1 1 1
Lockup Control 1 1 1 1
Lockup Selectable / Gear 1 1 1 1
Transfer Box Ratio Adjustments 1 1
Number of Gears Capable 10 10 10 10
Epoxy filed
Can be Epoxy filed 1 1 1 1

Notes

Note 1 – These drivers share the same Micro driver and cannot be used separately
Note 2 – * All drivers that is not used by the firmware become GP outputs

NB! Some of the firmware may still be under development. This is merely indicating the capabilities of the different classes. Make sure if such firmware is available before buying or quoting your customers

Was this article helpful?

Related Articles

Leave A Comment?

You must be logged in to post a comment.