This block displays all the analogue sensor values as they change in the TCU. You may change the appearance of some of the signals as well as the colors in the settings tab. Double click on certain fields will toggle between 2 types of views. Below is a description of the meaning of each signal.

Speed


This will indicate road speed.

Lockup

This will indicate if lockup is on or off as the TCU selects it.

Current Gear

This indicates what gear is selected by the TCU

Max Gear

This indicates what the maximum gear is allowed for the TCU. This is set by the driver.

RPM


This is engine RPM.

TPS

This will indicate pedal movement to tell the TCU what the driver is demanding from the engine. When it is calibrated it must move from 0% to 100% over the pedal movement.

Low Range

This will indicate if low range is selected by the driver.

Over Drive

This will indicate if overdrive is selected by the driver.

2ND Start

This will indicate if second gear pull-off is selected by the driver.

MAP

This will indicate which one of the 4 tuning maps is active.

Tiptronic

This will indicate if the tiptronic buttons are pressed.

Shifter

This will indicate which position of the shifter lever is selected.

Oil Temperature

This will indicate the transmission oil temperature.

Battery Volts

This will indicate battery charge condition, cranking and alternator volts.