Communication between devices and the Galaxy Software is done via a USB Cable manufactured by Spitronics. The reason for this is to reduce production cost and board space. These components are only used during tuning and you do not need the cable once the ECU/TCU are tuned. The electronics in the cable consist of the USB converter as well as isolation devices. This cable will protect the laptop during high voltage interference.
This cable requires drivers to be installed to operate. They can be downloaded from the Spitronics website under Downloads – USB Drivers. The baud rate to all products are 19200.
As development progressed over the years these products were upgraded as well. So keep in mind that cables between the products do differ. In some cases, you may require an adapter to use the USB cable on older products.
Leave A Comment?
You must be logged in to post a comment.