The Mercury Electronic is used as a fuel pump driver when fuel pressure control is activated. It is the PWM controlled to change the power to the fuel pump. It is driven by a positive signal from the ECU.
Note that a fuse before this relay is required to protect the circuits from over current. 45 Amp can melt thinner wires causing a fire hazard.
Specifications
Relay Maximum current – 45 Amp protected
LED Indication
Yellow Power on indication
Power required
12V 45 Amp
Inputs
1x Relay Trigger input – 5 to 18 volt for On condition, 0-1 volt for Off condition.
Outputs
1x 12 Volt output 45 Amp
Dimensions
Size 49 x 45mm x 21mm
Weight 50g Epoxy Filled
4 x Fly Leads
Leave A Comment?
You must be logged in to post a comment.